Advertisement
User Sample Edit Function Added
We added a function for editing a user sample that was imported to a
tone track or drum track.
For a drum track
1.
Press the
[NOTE] button
mode.
2.
Hold down the
[SHIFT] button
into which you imported the sample that you want to edit.
The menu appears.
3.
Use the
[VALUE]
dial to select
[VALUE]
dial.
The user sample edit screen appears.
For a tone track
1.
Hold down the
[SHIFT] button
The menu appears.
2.
Use the
[VALUE]
dial to select
[VALUE]
dial.
The user sample edit screen appears.
Parameter
Value
FWD, ONESHOT, REV,
Mode
REV-ONE
Start
0–8388607
Loop
0–8388607
End
0–8388607
OrgKey
C-1–G9
Fine
-50.0–50.0 cent
Gain
0 dB, +6 dB, +12 dB
Level
0–127
Added Shortcuts
Action
Operation
Copy the contents of a
In a drum track's NOTE mode, hold down the [SHIFT] button
drum kit pad
and press the [FX] button to copy the contents.
Once again hold down the [SHIFT] button and press the [FX]
Paste the contents of a
button to paste the contents.
drum kit pad
to switch the PAD MODE to NOTE
and press the
pad [1]–[16]
"SAMPLE EDIT,"
and press the
and press the
[SOUND]
"SAMPLE EDIT,"
and press the
Explanation
Specifies the playback method.
Specifies the position at which playback starts.
Specifies the loop position.
Specifies the position at which playback ends.
Specifies the pitch of the sample.
Finely adjusts the pitch.
Specifies the approximate volume of the sample.
Specifies the volume.
MC-101 Update
Problems and Functions Corrected
5
When using Auto Channel, notes that are input from an external MIDI
device are now output.
5
Fixed the problem in which copying did not occur correctly for STEP 2 in
the step copy/paste function.
5
When recalling a scene, the clip to edit is now also switched.
5
Fixed the problem that had sometimes prevented editing of the BPM
when a looper track's sample Strtch is set to "OrgBPM. "
5
Fixed the problem in which REC MEAS was sometimes not applied when
a clip is created.
5
Fixed the problem that had sometimes caused freezing when a sample is
previewed.
5
Fixed the problem in which a CC (control change message) sometimes
failed to be output when a track's knobs ([C1]–[C4]) were operated.
button.
6
– Functions Added in Ver.1.50
Advertisement
