Adjusting Your Monitor Image; Using Direct Access Controls - Lenovo ThinkVision Creator Extreme 62A6-RAR3-WW User Manual

Adjusting your monitor image

Using direct access controls

This section describes the control features to adjust your monitor images�
Direct access controls can be used when the On-Screen Display (OSD) is not displayed�
Icon Name
KVM Feature
1
DDC-CI
Exit
Input Source
2
Increase/Up
3 Decrease/Down
Menu
4
Enter
Description
Press this button to implement the KVM feature� For specif-
ic operations, please refer to "KVM Feature:" on page 2-9�
Press and hold for 10 seconds to enable or disable the
DDC-CI function�
Exit and return to the previous level�
Switch the video input source�
Shift back to the previous level when in OSD mode�
Press to move the main menu cursor up from the active item
to the last one�
Press to increase current values on the adjustment bar�
Press to move the main menu cursor down from the active
item to the next one�
Press to decrease current values on the adjustment bar�
Access the OSD menu�
Press to confirm selection�
Press and hold for 10 seconds will lock/un-lock the menu�
Press to enter the next level on the main menu/sub menu
status or enter the previous level on the adjustment bar�
Chapter 2 2-3