Hood installation
By installing a special hood, the surrounding stray light and reflection can be shielded, so that the
display content is clearer and the color accuracy is better�
1�
Unfold the hood body and place its middle part on the top of the monitor�
2�
Place the bars on the left and right sides and the sky side of the hood against the front sides and
top edges of the monitor�
3�
Attach the bezel on the rear of the hood to the back of the monitor�
Monitor controls
The keypad controls on the panel frame are accesses to various functions�
For information on how to utilize these keypad controls, please see "Adjusting your monitor image"
on page 2-3�
Cable lock slot
Your monitor is equipped with a cable lock slot located on the rear of your monitor (in the lower
position)�
Chapter 1 1-4