Table of Contents
Advertisement
Notice for use
Product overview
Adjustment type
Tilt
To set up your monitor, please see the illustrations below�
Note: Do not touch the screen of the monitor� The screen is made of glass and can be damaged by
rough handling or excessive pressure�
1�
Carefully lay the monitor on a flat surface�
2�
Align the stand assembly bracket to the monitor�
3�
Insert the bracket towards the monitor until it locks in place�
Note: To connect VESA mounting accessories, refer to "Wall Mounting (Optional)" on page 2-12�
In this section, we will describe how to adjust the position of the monitor; how to set user controls;
how to use the cable lock slot and install the hood�
Please see the illustration below for an example of the tilt range�
Chapter 1 1-2
Advertisement
Table of Contents
