Selecting A Supported Display Mode - Lenovo ThinkVision Creator Extreme 62A6-RAR3-WW User Manual

Selecting a supported display mode

The display mode that the monitor uses is controlled by the computer� Therefore, refer to your
computer documentation on how to change display modes�
The image size, position and shape might be changed when the display mode changes� This is
normal and the image can be re-adjusted using automatic image setup and image controls�
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel
technology is inherently flicker-free�
Note: If your system has previously been used with a CRT monitor and is currently configured
to a display mode outside the range of this monitor, you may need to reattach the CRT monitor
temporarily until you have re-configured the system; preferably to 3840*2160 at 60 Hz, which is a
common display mode�
The display modes shown below have been optimized at the factory�
Table 2-2� Display mode set by the manufacturer
Address ability
640 × 480
800 × 600
1024 × 768
1280 × 1024
1440 × 900
1600 × 900
1920 × 1080
1920 × 1200
3840 × 2160
HDMI video timing chart
640 × 480p
720 × 480p
1280 × 720p
1920 × 1080i
1920 × 1080p
720 × 576p
1920 × 2160p
3840 × 2160p
Refresh rate
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
Chapter 2 2-10