Texas Instruments CBL Manual Book page 33

CH31: Digital Out
Number of Data Elements
This parameter applies only to
that will be in the list. (Default:
0
–22
1
Data Elements
This parameter applies only to
elements to output from the
selected in Command 3 is met. The output is a 4-bit (TTL 0–5 Volts)
digital nibble for each data element. For example, 0=0000, 1=0001,
2=0010, 10=1010, 15=1111. (Default:
–15
0
Notes:
1. Refer to "Clock-Out Line Operation" (page 68) and "Digital Output
Buffer" (page 69) for additional technical information about this
parameter.
2. Refer to "Digital Nibble" in the Glossary for a definition of this term.
3. The Operation parameter to clear channels for
CH21
¦
Turns off the channel indicator for that channel.
¦
Turns off the conversion equation and the
channel.
¦
Clears data for that channel.
¦
Conversion equation remains loaded, but is not active.
¦
For Channel = 0, the above operations affect all channels.
Additionally, Record Time is turned off.
Clears the channel (refer last note below)
Selects the number of data elements to output
Selects the values of the data elements to output
and does the following:
CH31
. It sets the number of data elements
CH31
1 )
CH31 . It selects the actual digital data
DIG OUT channel when the trigger condition
0 )
CBLé System Guidebook
CH1 , CH2 , CH3 ,
EQ indicator for that
CH11 ,
33