Safety Information - multicomp pro MP700110 Manual

Electronic Digital Earth Resistance Tester is direct
replacement of the conventional hand generator type tester.
It is designed for measurement of the resistance of earthing
used in the electrical equipment as well as for measurement
of ground resistivity. It can be used for measurements of the
other low regular and liquid resistances. It can also be used
for measurement of voltage AC, voltage DC and resistance.
This instrument finds wide application for testing earthing
installation in power based industries, telecommunication
networks and electrical traction systems etc.
I. SAFETY INFORMATION
Read the following safety information carefully before

attempting to operate or service the meter.
To avoid damages to the instrument do not apply the

signals which exceed the maximum limits shown in the
technical specifications tables.
Do not use the meter or test leads if they look damaged.

Use extreme caution when working around bare
conductors or bus bars.
Accidental contact with the conductor could result in

electric shock.
Use the meter only as specified in this manual;

otherwise, the protection provided by the meter may be
impaired.
Read the operating instructions before use and follow all


safety Information.

2