Adding Cameras To The Camera List - ActionTec 54 Mbps Wireless Network Camera User Manual

Adding Cameras to the Camera List

To add a camera to the Camera List, click Add Camera on the main screen. You will see a
screen like the example below.
•
Cameras on LAN - displays all Cameras found on your LAN. This list can be updated by
clicking Refresh.
•
Camera Data - displays the data for the selected Camera.
To add a Camera to the Camera List on the main screen:
1. Select a Camera from the list on the left.
2. Check that the "Camera Data" on the right side of the screen is correct. See below for
details.
3. Click Add. The Camera will now appear in the Camera List on the main screen.
Camera Data - LAN
Device Name Displays the default name of the Camera, and cannot be changed.
Description Displays the description entered by the Camera administrator.
Address Displays the current IP address of the Camera.
Port Number This will normally display "80." Only change this if requested to do so
by the Camera administrator.
Login The Camera administrator can require that users provide a username and
password before being allowed to view the live video.
•
•
You can add the same Camera twice, once for the LAN (using
the LAN IP address), and again for the Internet (using the
Internet IP address). This will allow viewing the Camera whether
you are on the same LAN as the Camera or in a remote location.
Figure 37: Add Camera from LAN
If the administrator has not enabled this option, the "Login" fields
can be left blank.
Otherwise, you must enter the username and password allocated to
you by the administrator.
44