ActionTec 54 Mbps Wireless Network Camera User Manual page 25

3. In the "Show 'From' as" field, enter the e-mail address you want to display as the sender
when you receive the e-mail. This should be a genuine e-mail address, otherwise spam
filters may block your e-mail.
4. Enter a suitable "Subject" for the e-mail.
5. Enter the address of the SMTP server in the "Outgoing Mail SMTP Server" field.
If the SMTP server requires a "login" in order to send e-mail, activate My Mail Server
Requires Authentication and enter your login name and password.
6. Select the desired options
•
Delay between E-mails –-used to prevent your e-mail inbox being flooded with
e-mails. Select the desired time interval.
•
Motion Sensitivity - determines how readily the motion detection sensor is activated.
You can select the sensitivity, and also select the areas of the image to be examined.
Note: You must select at least one area. If you don't, the motion detection will never
be triggered, and no e-mail alerts will ever be sent.
7. In the "Video" section, select the desired options
•
Include Video - select Yes if you want to include a video with the e-mail.
•
Video Length - set as desired. Note that if using higher resolution and lower
compression, even a short video file could be quite large.
8. Click Apply to save your changes.
21