•
Keys - If using WEP, the default key must match the key used on your other wireless
stations. The other keys are optional.
You can enter the key value directly, or generate a key by entering a string into the
"Passphrase" field, and clicking the "Generate" button.
If using WPA-PSK on your access point or router, enter the same pre-shared key. This
is an alphanumeric between 8 and 63 characters long, and is case-sensitive.
Click Next to continue to the following screen.
8. This screen allows you to enter a suitable description of the Camera, and set the correct
time zone, date, and time. Make any desired changes, then click Next to continue.
9. The next screen, shown below, displays all details of the Camera.
•
Click Save if the settings are correct.
•
Click Back to modify any incorrect values.
Figure 11: Camera Settings
Figure 12: Save Settings
12
Need help?
Do you have a question about the 54 Mbps Wireless Network Camera and is the answer not in the manual?