Upgrade Firmware Screen
This screen is displayed when you click Upgrade Firmware on the Status screen.
This screen allows you upgrade the Camera's firmware. Before using this screen, you must
download the upgrade file to your computer.
After downloading the upgrade file:
1. Click Browse, and locate the upgrade file.
2. Select the file, then click OK. The filename appears in the "Upgrade File" field.
3. Click Start Upgrade to transfer the file to the Camera and start the upgrade procedure.
Note:
•
The "Cancel" button cannot cancel an upgrade once it has started.
•
The upgrade may take several minutes.
•
When the upgrade is complete, the Camera restarts. This will cause any existing
connections to be terminated, and any users viewing or recording video will see an error.
Figure 33: Upgrade Firmware Screen
40