Installing The Sensor; Real-Time Data - Seametrics DO2 Instructions Manual

INSTALLATION AND OPERATION

Installing the Sensor

Lower the sensor to the desired depth. Fasten the cable to the well head using tie
wraps or a weather proof strain-relief system. Take a measurement to insure the
sensor is not installed below its maximum range.
Be sure the supplied cap is securely placed on the weather-resistant connector
at the top of the cable. Do not install such that the connector might become
submerged with changing weather conditions. The connector can withstand
incidental splashing but is not designed to be submerged.

Real-time Data

Connect to sensor and select the Real-time data tab
To start real-time readings click Start, readings default to table view. To switch to
Real-time graphing view click the graph icon
Seametrics • 253.872.0284 Page 6
DO2 INSTRUCTIONS
seametricscom