Symbols And Units Of Measure - Compac CNG Installation And Service Manual

Symbols and Units of Measure

Symbols and Units of Measure
Symbols
Units of Measure
Compac Industries Ltd.
Symbols are used in this manual to highlight information that is critical
to the safety of people and equipment, and for the safe and correct
operation of the Compac equipment
An extreme hazard that may result in death or injury if
proper precautions are not taken.
A reminder of safety practices or unsafe practices that
could result in personal injury or damage to associated equipment.
A reminder of safety practices or unsafe practices that
could result in damage to associated equipment and/or voids the
warranty.
Important information essential to the installation and
operation of the Compac equipment
The following units of measure are used in this manual:
Unit
Pressure
Temperature
Volume
Mass
Length
Torque
Voltage
Current
Frequency
Page 7
Measure
Bar (bar)
Degrees Celsius (°C)
Litres (l)
Cubic Metres (m³)
Kilograms (kg)
Metres (m)
Millimetres (mm)
Microns, Micrometres (m)
Inches (")
Newton Metres (Nm)
Volts (V)
Amps (A)
Frequency (Hz)
www.compacngv.com