Reading The Loading Post Totals - Compac CNG Installation And Service Manual

Set-up

Reading the Loading Post Totals

Compac Industries Ltd.
To read the loading post totals:
1. Quickly press the Start button five times. The total is 10 digits
long. The four most significant digits are displayed on the top line
and the number wraps to the second line showing the six least
significant digits.
The dispensed value (if the meter has been programmed with a
value) will be shown on the display for 10 seconds. This will be
shown as:
d
Followed by a 10 digit Total. If no value has been set, this will
show 0.
The dispensed quantity will then be shown next and will be
displayed for 10 seconds. This will be shown as:
L
Followed by a 10 digit Total. This is the kilograms dispensed
(unless another unit measure has been set using the Density
Factor switch).
Page 21
Reading the Loading Post Totals
www.compacngv.com