Preparing The Tractor - Toro Wheel Horse XT Series Operator's Manual

Description
Discharge tube
Knob
Washer, 7/32 inch
Screw, #10 x 5/8 inch
Blower drive belt
Belt cover—42 inch deck
Belt cover bracket—42 inch deck
Flange head screw, 1/4 x 1/2 inch
Bolt, 1/4 x 5/8 inch
Locknut, 1/4 inch
Belt cover—48 inch deck
Belt cover bracket—48 inch deck
Flange head screw, 1/4 x 1/2 inch
Bolt, 1/4 x 5/8 inch
Locknut, 1/4 inch
Bolt, 1/4 x 5/8 inch
Locknut, 1/4 inch
Quick–attach bracket
Hairpin cotter
Grass Bag
Discharge tube
Bolt, 3/8 x 2–1/4 inch
Locknut, 3/8 inch
Washer, 3/8 inch
Counterweight
Decal
Operator's Manual

Preparing the Tractor

Preliminary Preparation
Park the tractor and mower on a level surface, disengage
the blade control (PTO), set the parking brake, and turn
the ignition key to off. Remove the ignition key.
Lower the mower to its lowest position and remove the
mower from the tractor. Refer to Mower Operator's
Manual for removal instructions.
Qty.
1
1
Assembling the discharge tube
1
1
1 Mounting the blower assembly
1
1
Installing the belt cover on 42 inch mower
5
2
2
1
1
Installing the belt cover on 48 inch mower
5
2
2
2
Installing the blower belt cover
2
1
1
Installing the bagger assembly and bags
2
1 Installing the discharge tube
2
2
2 Installing the mower counterweight
1
1
1 Read before operating
Thoroughly clean the mower. All debris must be removed
to ensure that parts will fit the mower properly.
6
Use