Toro Wheel Horse XT Series Operator's Manual page 17

Removing the Mower Belt Cover
1. Remove the mower belt cover from the right side
pulley (Fig. 36). Save the mounting hardware.
1
m–6644
Figure 36
1. Belt cover–42 inch
Removing the Blower from the Mower
1. Open the latch and swing the blower out away from
the mower, remove the blower belt from the double
pulley (Fig. 37).
Figure 37
1. Double pulley
2. Remove the blower by lifting the pivot pin out of the
pivot support (Fig. 38).
2
m–6645
2. Belt cover–48 inch
1
m–4446
17
1
2
Figure 38
1. Pivot pin
Removing the Blower Pivot Support
1. Remove the pivot support from the mower (Fig. 39).
Note: Save all parts and hardware for use when installing
the blower.
4
1
3
Figure 39
1. Pivot support
2. Nut
3. Bolt
Installing the Belt Cover and Grass
Deflector
Note: Always install the grass deflector when changing to
the side discharge mode.
1838
2. Pivot support
5
2
1494
4. Flange nut
5. Plastic washer