Toro Wheel Horse XT Series Operator's Manual page 16

Removing the Bagger
1. Tip the tractor seat forward.
2. Raise the bagger top and remove the grass bags from
the bag frame (Fig. 32).
1
2
Figure 32
1. Bagger top
Caution
If you remove the bagger top when it is closed (in
the down position), the top may suddenly fly open
and you or someone may be bruised, pinched, or
injured.
Always open (raise) the bagger top before you
remove or install it on the quick-attach bracket.
3. With the lid in the open position, carefully lift the
bagger top and slide off the quick-attach bracket
(Fig. 33).
1
2
Figure 33
1. Bagger top
1376
2. Bag retainer handles
2. Quick-attach bracket
16
4. Remove the hairpin cotter and slide the bottom of the
quick-attach bracket up out of the hole in the hitch and
unhook it from the spacers located inside the tractor
frame (Fig. 34).
1
2
Figure 34
1. Quick-attach bracket
2. Hole in hitch
5. Move the tractor seat to its normal position.
Removing the Blower Belt Cover
1. Remove the blower belt cover by removing the
2 locknuts (1/4 inch) and 2 bolts (1/4 x 5/8 inch)
(Fig. 35).
Note: Save all parts and hardware for use when installing
the blower.
1
2
Figure 35
1. Mower belt cover
2. Bolt 1/4 x 5/8 inch
(16 mm)
3
3
4
2267
3. Spacers
4. Hair pin cotter
2 and 3
3
1997
3. Lock nut 1/4 inch