Installation
5.7
Connections
5.7.1
Network connection
28
Power supply
PoE
PoE+
External 24 V DC power
supply unit
In case of power supply via an external power supply unit, the switch position PoE+ is
required to prevent the access manager from limiting the power for external con-
sumers.
Establishing the network connection
Plug in the network cable into the Ethernet receptacle (1) and fasten it in the gland
on the cover.
If the power supply is correct, the Power LED (2) lights up in green after a short time.
Once the network connection has been established, the Ethernet LED (3) is flashing
in yellow.
04045524 - 08/2016
Standard/Power
IEEE 802.3af (12.95 W)
IEEE802.3at (25.5 W)
12-60 W
Technical Manual
Switch position
PoE
PoE+
PoE+
Kaba access manager 92 32