Cable Routing; Setting The Poe Switches - Kaba Access manager 92 32 Technical Manual

Technical Manual
5.5

Cable routing

5.6

Setting the PoE switches

Kaba access manager 92 32
The installation lines are guided through an opening on the bottom side of the de-
vice from the rear side to the front side of the device.
The cable passage and the internal cover have eyelets for fastening of installation
lines by means of cable ties (not included in the scope of delivery).
For the network cable, there is a routing duct on the inner cover.
Depending on the power supply type, the PoE switch must be set as described be-
low.
04045524 - 08/2016
Installation
27