Technical Manual
3.3
Technical Data
3.3.1
System
3.3.2
Power supply
3.3.3
Output voltages
Kaba access manager 92 32
Access manager processor
•
ARM926, system clock 454 MHz
•
NOR flash memory: 64MB
•
RAM: 64 MB
•
Operating system: WIN CE
exivo processor
•
ARM Cortex A5, system clock 536 MHz
•
NAND flash memory: 256 MB
•
RAM: 256 MB
•
Operating system: Linux
For power supply of the device, there are the following alternative options:
•
PoE (Power over Ethernet)
•
External 24 V DC power supply unit
PoE (Power over Ethernet)
Power supply via the 8-wire Ethernet cable (max. 100 m, min. Cat-5e)
•
Acc. to IEEE 802.3af (12.95 W) and IEEE802.3at (25.5 W=> PoE+)
24 V DC input
Power supply via the 24 V DC input using an external power supply unit.
•
Input voltage: 24 V DC ±10%
•
Current consumption: max. 2.5 A
•
Power of the power supply unit: 12-60 W
For supply of the device, a power output of approx. 12 W is necessary. Depending on
the required power for output voltages, additionally up to 48 W for external con-
sumers.
Use only power supply units that fulfill the requirements of EN/UL/CSA 60950-1 as
LPS (Limited Power Source).
Use
Terminals
Power supply
12 V DC OUT
for external readers
Power supply
Switchable to OUT1
for door opener
Selection via jumper
etc.
1
The power specification requires that the permissible maximum impulse power
for PoE supply is not exceeded.
–
IEEE 802.3af (PoE) = 12.95 W
–
IEEE802.3at (PoE+) = 25.5 W
2
The output voltage 24 V DC is available only for power supply via an external
power supply unit. Not for PoE power supply.
04045524 - 08/2016
Product Description
Performance figures
1
12 V DC; max. 3 W
respectively
12 V DC; max 7 W (PoE)
12 V DC; max. 17 W (PoE+)
2
24 V DC; max. 48 W
11