Fujitsu 467 Manual page 26

Gdc board
Table of Contents

Advertisement

Prepared
Manfred Ortmann
Approved
dual edge clocking. In 12-bit mode, the SiI164 supports dual edge single clocking or single edge
dual clocking.
The SiI164 can be programmed though the I2C interface. The multi-function address inputs A1,
A2 and A3 of U400 are strapped to ground by resistors R409, R410 and R412 so the slave
address for readings is 0x71 and the slave address for writings is 0x70. The multi-function
address inputs of U402 A2 and A3 are strapped to ground by resistor R423 and R424 and A1 is
strapped to VCC by resistor RN402 so the slave address for readings is 0x73 and the slave
address for writings is 0x72.
The SiI164 support receiver and hot plug detection.
The triple 8-Bit high speed video digital-to-analog converter ( DAC ) ADV7125JSTZ240 ( U401
and U403 ) from Analog Devices convert the digital RGB666 video output signals from the GDC
to an analog video signals. Outputs from U403 are connected to DVI-I connector X400. Outputs
from U401 are connected to DVI-I connector X401 over multiplexer U404 FSAV330MTC
( MPLEX_CTRL ).
Following table shows the assignment of pins, signals and function from the connectors X402
and X403. For X403 the index 0 has to be changed to 1.
Checked
Pin
Signal
1
GND
2
GND
3
VO0_B0
4
VO0_B1
5
VO0_B2
6
VO0_B3
7
VO0_B4
8
VO0_B5
9
VO0_B6
10
VO0_B7
11
VO0_G0
12
VO0_G1
13
VO0_G2
14
VO0_G3
15
VO0_G4
16
VO0_G5
17
VO0_G6
18
VO0_G7
19
VCC33
20
VCC33
21
VCC33
22
VCC33
23
VO0_R0
Preliminary
Document Number
Date
Revision
2008-05-14
PA 3.5
Function
Ground
Ground
Digital RGB output 0 Data blue
Digital RGB output 1 Data blue
Digital RGB output 2 Data blue
Digital RGB output 3 Data blue
Digital RGB output 4 Data blue
Digital RGB output 5 Data blue
Digital RGB output 6 Data blue
Digital RGB output 7 Data blue
Digital RGB output 0 Data green
Digital RGB output 1 Data green
Digital RGB output 2 Data green
Digital RGB output 3 Data green
Digital RGB output 4 Data green
Digital RGB output 5 Data green
Digital RGB output 6 Data green
Digital RGB output 7 Data green
+ 3.3 V
+ 3.3 V
+ 3.3 V
+ 3.3 V
Digital RGB output 0 Data red
Storage
Mycable01
26(36)

Advertisement

Table of Contents
loading

Table of Contents