Fujitsu 467 Manual page 27

Prepared
Manfred Ortmann
Approved
Table 2-7: Pin assignment X402 and X403
Following table shows the assignment of pins, signals and function from the UART connector
X404 and X405. For X405 the index 0 has to be changed to 1.
Checked
Pin Signal
24 VO0_R1
25 VO0_R2
26 VO0_R3
27 VO0_R4
28 VO0_R5
29 VO0_R6
30 VO0_R7
31 VO0_HSYNC
32 VO0_VSYNC
33 VO0_DE
34 VO0_CSYNC
35 NC
36 VO0_CLK_RGBD
37 I2C_SCL
38 I2C_SDA
39 GND
40 GND
Pin Signal
1 VCC50
2 VCC50
3 GND
4 GND
5 VCC33
6 VCC33
7 NC
8 GND
9 VO0_B0
10 VO0_B1
11 VO0_B2
Preliminary
Document Number
Date Revision
2008-05-14 PA 3.5
Function
Digital RGB output 1 Data red
Digital RGB output 2 Data red
Digital RGB output 3 Data red
Digital RGB output 4 Data red
Digital RGB output 5 Data red
Digital RGB output 6 Data red
Digital RGB output 7 Data red
Video output interface horizontal sync output
Video output interface vertical sync output
DE / CSYNC
DE / CSYNC
Not connected
Video output interface dot clock output
I2C interface 0 SCL
I2C interface 0 SDA
Ground
Ground
Function
+ 5.0 V
+ 5.0 V
Ground
Ground
+ 3.3 V
+ 3.3 V
Not connected
Ground
Digital RGB output 0 Data blue
Digital RGB output 1 Data blue
Digital RGB output 2 Data blue
Storage
Mycable01
27(36)