Basic Installation And Configuration - TRENDnet TWG-431BR User Manual

TRENDnet User's Guide

Basic Installation and Configuration

IMPORTANT NOTE: The default mode for the interfaces is 1 x LAN / 4 x WAN. In this
mode, NAT throughput/performance will have a performance limitation of 200Mbps per
WAN interface.
1. Connect a network cable from the Port 2 WAN1 of your router to your modem.
2. Connect a network cable from Port 1 (Active LAN) your router to your computer.
3. Connect the includes power adapter from a power outlet to your router power port
and push the Power On(-)/Off(o) switch into the On(-) position.
4. After you have the unit powered on and have connected your computer into the
Active LAN port, open your web browser and type the IP address of the router in the
address bar, then press Enter. The default IP address is 192.168.10.1.
© Copyright 2019 TRENDnet. All Rights Reserved.
5. Enter the User Name and Password, and the click OK. By default:
User Name: admin
Password: admin
TWG-431BR
2