L2Tp Vpn Server; Setting Up The L2Tp Vpn Server Without Ipsec Encryption - TRENDnet TWG-431BR User Manual

TRENDnet User's Guide
10. You can choose to enter the account credentials in the fields provide for
authentication or if not, you will be prompted when attempting to establish PPTP VPN
connection to your TWG-431BR router. Click Save.
11. Under VPN, the new VPN connection will be listed. Click Connect.
12. The status will display Connected if the PPTP VPN connection was successful.
© Copyright 2019 TRENDnet. All Rights Reserved.

L2TP VPN Server

System > L2TP Server Setup
You can enable and configure the L2TP VPN server on your router to allow remote
computers or mobile devices with L2TP support to connect securely over the Internet
and access the company LAN network. It is strongly recommended to enable L2TP VPN
server with IPsec instead of L2TP VPN only due to the higher degree of security offered
and supported on most modern computers and mobile devices.

Setting up the L2TP VPN server without IPsec encryption

1. Log into your router management page (see
on page 7).
2. Click on System and click L2TP Server Setup.
3. For the Mode, select the Enable option to enable the L2TP server.
4. In the Local IP Address field, enter an IP address other than the LAN IP address.
(Default LAN IP: 192.168.10.1) (e.g. 192.168.80.1)
Note: Entering an IP address different from the LAN IP address as the Local IP of the L2TP
server ensures your L2TP VPN clients are able to access the Internet and the router LAN
network via full tunneling. If the LAN IP address is entered, L2TP VPN clients will be
allowed to access router LAN and not the Internet.
TWG-431BR
"Access your router management page"
47