Table of Contents
Advertisement
F
G
⑤ Select the 1st bar-tacking shape.
Select the shape you desire to sew from among 5 kinds of the 1st
bar-tacking shape buttons (F). When it is selected, the total sew-
ing shape in which the 1st bar-tacking shape is used is displayed.
⑥ Select the sewing shape.
Select SEWING SHAPE button (G) you desire to sew.
⑦ Finish the selection of sewing shape.
Press ENTER button
shape. Then the sewing shape which has been selected is dis-
played in the LBH data input screen (blue). The initial value of
sewing data is inputted according to the selected sewing shape.
H
Note) Number of sewing shapes to be displayed changes according to
the level selected in the
memory switch data (level 2).
→
Refer to
"II-3-1. Changing procedure of memory switch data"
p.110.
− 79 −
(H) to finish the selection of the
sewing shape selection level of
Advertisement
Table of Contents
