Table of Contents
Advertisement
Format the Shared Drives on the AcerAltos RS700
After finishing the installation of node 1 and node 2, begin to format the
shared drives on the AcerAltos RS700.
1.
Power on the node 1 and Power off node 2.
2.
Assume that there is one HDD and one CD-ROM on node 1.
3.
Configure the system drive as drive C: and CD-ROM as drive D:. You
will find the other four drives on the Disk Administrator.
4.
Format these four drives to NTFS, and assign the sticky drive letters to
all shared disks. For example:
Assign I, J, K, and L to these four drivers, and you can find the drive
configuration on the Disk Administrator.
5.
Power on node 2, but don't power off node 1.
6.
Assume that there is one HDD and one CD-ROM on node 2.
42
Advertisement
Table of Contents
