Table of Contents
Advertisement
Chapter 4
Removing and Installing the
Enclosure Panels
Before touching any electrical equipment, ground yourself by touching the
metal part of your computer chassis. This discharges any static electricity
and will prevent any damage to your computer.
Removing the Left and Right Panels
1.
Turn off power to the system unit and unplug all cables.
2.
Place the system unit on a flat, steady surface.
3.
Remove the screws of the left and right panels. Set the screws aside.
You will need them when replacing the panels.
4.
Slowly pull out both of the panels.
To reinstall the left and right panels, simply reverse the procedures discussed
above.
22
Advertisement
Table of Contents
