Table of Contents
Advertisement
Software Installation and Configuration
Set up the cluster server software by taking the following steps:
1.
Power on the External Shared Storage. Don't power off the External
Shared Storage while setting up the Cluster.
2.
Install Windows NT server 4.0 on node1.
3.
Install Windows NT server 4.0 on node2.
4.
Check the functions of the network between the two nodes.
5.
Format the shared drives on the AcerAltos RS700.
6.
Install MSCS (Microsoft Cluster Server) on node1.
7.
Install MSCS (Microsoft Cluster Server) on node2.
8.
Confirm the installation is successful.
38
Advertisement
Table of Contents
