Altos T110 F4 Installation Configuration Guide INTRODUCTION The driver required for installing the OS manually is included in Resource CD, this document provides you a OS installation guide on Altos T110 F4, including, Windows Server 2012 R2 Red Hat Enterprise Linux 7.3...
Altos T110 F4 Installation Configuration Guide WINDOWS SERVER 2012 R2 Intel Onboard SATA RAID Below information describes how to manually install Windows Server 2012 R2 on Altos T110 F4 with Intel Onboard SATA RAID. BIOS Required Altos T110 F4 BIOS 1.0b...
Select Resource Kit. Select model and click on Drivers. Find the Chipset Driver by expanding the directory in the following order, Altos T110 F4 -> (On board) Chipset -> Intel Chipset INF files. Select Windows Server 2012 R2 then click on Browse.
Altos T110 F4 Installation Configuration Guide Find the Gigabit Ethernet Driver by expanding the directory in the following order, Altos T110 F4 -> (On Board)LAN -> Intel PRO Network Connections Drivers. Select Windows Server 2012 R2 then click on Browse.
OS Built-in Ethernet Installation Tips NOTE. Please refer to Altos T110 F4 FAQ (Frequently Asked Questions) to select OS installation in EFI mode or Legacy mode if the OS media supports EFI. Please boot the system from the Red Hat Enterprise Linux 7.3.
Altos T110 F4 Installation Configuration Guide APPENDIX A: INTEL Set Intel Onboard SATA RAID in EFI Mode ONBOARD SATA RAID CONFIGURATION Please enter BIOS Setup during POST Please select Boot Options. You would see below information. Boot Mode [UEFI] NOTE. The default setting is DUAL.
Altos T110 F4 Installation Configuration Guide Select Create Volume. Now the RAID volume is created, you can press ESC and select Exit to exit. Initializing a RAID Volume During Intel Onboard SATA RAID volume creation process, the Intel Onboard SATA RAID volume will be automatically initiated once the onboard SATA RSTe RAID volume has been created.