Table of Contents
Advertisement
For RS700-RM 101:
Single SCSI Channel with 7 drive bays
Default SCSI ID is 8,9,10,11,12,13, and 14
One internal Ultra2 SCSI terminator
One external Ultra2 SCSI cable (2500mm)
For RS700-RM 102:
Dual Internal SCSI channel:
First SCSI channel with 3 drive bays. Default SCSI ID is 0, 1, and
2
Second SCSI channel with 4 drive bays. Default SCSI ID is 0, 1,
2, and 3
One external Ultra2 SCSI cable (2500mm)
Two internal Ultra2 SCSI terminators
One SCSI expander (SE to LVD converter)
One AA-3102RS RAID Controller with 16 MB EDO RAM (Refer to
Appendix A for default setting)
Features
RS700 supports the following features:
Hard Drive Interface
Supports up to seven 1" or 1.6" drives (Ultra-2)
Supports 4 GB, 9 GB, and 18 GB hard drive
7,200 RPM and 10,000 RPM hard drive support
Ultra-2 (80 MB/sec.) interface (for TR101/RM101 model only)
Cooling fan for each hard disk drive tray
Hot-swappable drive tray for on line maintenance
3
Advertisement
Table of Contents
