Table of Contents
Advertisement
The distance from the center of two holes with closer spacing to the center of
the next pair is equivalent to 1U.
When installing components, you must start your measurement from the
center of the two holes with closer spacing. Otherwise, the screw holes on
the component may not match with those on the rack.
To install the RS700-RM101/102 into the AcerAltos Rack:
1.
Locate an unoccupied spot in the rack
subsystem spacing and positioning, please refer to the AcerAltos Rack
Installation Guide).
2.
Secure the angular steel bars on the 2
four screws.
Please refer to the previous section for more information.
Make sure that both of the angular bars are at the same level.
The RS700-RM101/102 enclosure occupies 4U
in the AcerAltos Rack. Count the 2
rack from the bottom.
16
(for reference to storage
nd
rd
nd
and 3
holes of the 2
nd
U of the
U using
Advertisement
Table of Contents
