cecotec CONGA WINROBOT EXCELLENCE 970 Instruction Manual page 37

ENGLISH
2
Red light flashing
and beeps warning
3
Product driving
4 wheel idling, walking
path anomalies
36 CONGA WINROBOT EXCELLENCE 970
Power adapter not
connected
Vacuum not enough
in work status
Anti-fall sensor error
in work status
Glass surface is dirty
A. Connect the power first, and
press Start to make the product
work again.
B. In case of power cut, use remo-
te controller to direct the product
to the place where safely reach it
and remove it.
There is some risk when using
remote controller under power
cut, please make sure that highest
safety precautions are taken.
According to real conditions, use
remote controller to control pro-
duct back to safety position.
There is some risk when using
remote controller under power
cut, please make sure that highest
safety precautions are taken.
Check if there is any dust in the
anti-fall sensors, and clean it. If
it does not work, please contact
customer service.
A. Cleaning driving wheels.
B. Change cleaning fibers.
This product is not suitable for
too dirty glass.