Associated Research HypotPLUS II Operation And Service Manual page 30

Altitude............................ 7,620 meters (25,000 feet)
The instrument should also be protected against temperature extremes which may cause
condensation within the instrument.
Packaging
Original Packaging: Please retain all original packaging materials if you do not have an
alternate method of repackaging. If you are returning your instrument to us for servicing
please repackage the instrument in its original container or use an alternate packaging
solution. Please do not reuse the original packing material if there appears to be damage or
missing packing material. Contact our customer support department (1-800-858-8378) for
an RGA (return goods authorization) number. Please enclose the instrument with all
options, accessories and test leads. Indicate the nature of the problem or type of service
needed. Also, please mark the container "FRAGILE" to insure proper handling. Upon
receipt your instrument will be issued an AR service number. Please refer to this number
in all correspondence.
Other Packaging: If you do not have the original packaging materials please follow these
guidelines:
1). Wrap the instrument in a bubble pack or similar foam. Enclose the same information
as above.
2). Use a strong double-wall container that is made for shipping instrumentation. 350 lb.
test material is adequate.
3). Use a layer of shock-absorbing material 70 to 100 mm (3 to 4 inch) thick around all
sides of the instrument. Protect the control panel with cardboard.
4). Seal the container securely.
5). Mark the container "FRAGILE" to insure proper handling.
6). Please ship models 5500DT and 5560DT via Federal Express or UPS air.
7). Please refer in all correspondence to your AR service number.
Field Installation Of Options
There are no field installable options on the model 5500DT or 5560DT.
INSTALLATION
25