Associated Research HYAMP 3240 Quick Start Manual

Hide thumbs Also See for HYAMP 3240:

Advertisement

Via Acquanera, 29
tel. 031.526.566 (r.a.) fax 031.507.984
info@calpower.it
Quick Start Guide
SAFETY CHECKLIST
S
urvey the test station. Make sure it is safe & orderly.
A
lways keep unqualifi ed/unauthorized personnel away from the test area.
F
amiliarize yourself with safety protocols in the event of a problem.
E
xercise caution and never touch products or connections during a test.
T
rain operators. Never touch clips directly and always connect the return lead fi rst.
Y
ou should always know when a test is being performed.
WARNING: THIS GUIDE WAS CREATED FOR OPERATORS HAVING SOME FAMILIARITY WITH ELECTRICAL SAFETY
TESTING. AN ELECTRICAL SAFETY TESTER PRODUCES VOLTAGES AND CURRENTS THAT CAN CAUSE HARMFUL
OR FATAL ELECTRIC SHOCK. TO PREVENT ACCIDENTAL INJURY OR DEATH, THESE SAFETY PROCEDURES MUST
BE STRICTLY OBSERVED WHEN HANDLING AND USING A TEST INSTRUMENT. CONTACT US AT
INFO@ARISAFETY.COM FOR MORE INFO ON HOW TO GET TRAINED ON ELECTRICAL SAFETY TESTING.
22100 Como
www.calpower.it
HYAMP
®
Model 3240

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HYAMP 3240 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Associated Research HYAMP 3240

  • Page 1 Via Acquanera, 29 22100 Como tel. 031.526.566 (r.a.) fax 031.507.984 info@calpower.it www.calpower.it Quick Start Guide HYAMP ® Model 3240 SAFETY CHECKLIST urvey the test station. Make sure it is safe & orderly. lways keep unqualifi ed/unauthorized personnel away from the test area. amiliarize yourself with safety protocols in the event of a problem.
  • Page 2: Instrument Setup

    INSTRUMENT SETUP WARNING: LOCATE A SUITABLE TESTING AREA WITH A THREE-PRONG, GROUNDED OUTLET. BE SURE THAT YOUR THREE-PRONG OUTLET HAS BEEN TESTED FOR PROPER WIRING. READ THE SAFETY CHECKLIST OF THIS GUIDE BEFORE STARTING TO TEST. Find parts for Instrument Setup in Section 1 of your Accessory Box. Connect the female end of the power input plug into the rear of the instrument and plug the male end of the cord into a grounded...
  • Page 3: Touch Screen Operations

    TOUCH SCREEN OPERATIONS Back Home Test Screen TOUCH SWIPE UP, DOWN, LEFT & RIGHT Tap the virtual buttons to open various functions. Simple swipes allow you to quickly move through screens & parameters DRAG & DROP TOUCH & HOLD Drag and drop meters on your Perform Touch and hold test fi...
  • Page 4: Test Setup

    TEST SET UP TAP SETUP TESTS TAP ADD FILE ADD FILE NAME Home Screen File Screen Tap the ENTER ( ) key to save your selection TAP ADD STEP TAP TEST SETTING EDIT PARAMETERS Tap the test type, and Add Step the parameter you would Tap parameter values to like to edit.
  • Page 5: Test Connection

    TEST CONNECTION WARNING: DO NOT TOUCH THE DEVICE UNDER TEST ONCE YOU START THE TEST. Find test leads for DUT Connections in Section 2 of your Accessory Box. Connect the black return test lead (P/N 38490) to the black Return terminal located on the front panel of the instrument.
  • Page 6 Hypot INTERCONNECTION ® INTERCONNECTION OF HYAMP SERIES TO HYPOT SERIES ® ® You can interconnect a HYAMP to all Hypot models to form a complete test system. ® ® Using the rear panel connections, connect the following cord: a. P/N HS-8-11 - Plug one end into the rear Sense (-) terminal on the HYAMP Ground Bond tester.
  • Page 7 CONNECTION TO A DEVICE UNDER TEST P/N 38490 - Plug the black return test lead into the front panel Return terminal on the HYAMP ® Clip the end of the test lead to chassis ground of the DUT. P/N 38482 - Plug the red high current lead of the adapter box into the front panel Current terminal on the HYAMP ®...
  • Page 8 For additional information about these and other key features of the HYAMP , please consult the ® full Operation and Service Manual or call us toll-free 1-800-858-TEST (8378) or +1-847-367-4077 ©2017 Associated Research arisafety.com • FOLLOW US! 7/2017...

Table of Contents