Door Latch; Terminal Block; Drain Hose; Dispenser - Bosch Ascenta SHX3AM Repair Instruction

4.8

Door latch

The door latch is mounted on top of the tank and doesn't contain
a microswitch. It uses a Hall-effect sensor in the door to sense
when the door is open or closed. The Hall-effect sensor is held
by two T-10 Torx screws. The door latch is held by one T-20
Torx screw and two tank tabs.
Hall effect
sensor
4.9

Terminal block

Terminal blocks clearly show line (L), neutral (N) & ground (G)
connections.
702_58300000130262_ara_en_b
Door
latch
Hall effect
sensor
4.10

Drain hose

Ascenta dishwashers use a two-hose (internal / external) drain
hose system. A customer (external) drain hose (during
installation) is connected to the internal drain hose, with the 90º
elbow pointing toward the customer drain. The external drain
hose connects directly to the customer drain system without an
adapter.
92" Customer (external) drain hose
4.11

Dispenser

The dispenser is located in the middle of the inner door and
reliably dispenses detergent and rinse-aid.
Page 12 of 27