Cheetah Pregius Camera with 10 GigE Vision Interface – User Manual
About the Camera
General
The 10 GigE Vision SFP+ Cheetah CMOS cameras are built around advanced Sony Pregius CMOS
image sensors with global shutter for high quality images in a small ruggedized form factor.
Cheetah cameras are progressive scan digital cameras featuring a built-in image-processing
engine, low power consumption, low noise, high dynamic range (71 dB), and fast frame rates for
high throughput applications.
The cameras provide several trigger modes and output strobes allowing you to synchronize the
image capture of one or more cameras to an external event. You can vary exposure times using
internal controls or an external pulse width.
The cameras also provide an area of interest (AOI), programmable look-up tables (LUT) and the
ability to store up to four different camera configurations. Using the simple GenICam™ compliant
user interface, you can quickly change the camera configuration. User-defined LUT capabilities
optimize the cameras' dynamic range. Hot and defective pixel correction is available to correct
over-responding or under-responding pixels.
The cameras are suitable for a wide range of environmental conditions and applications, such as
machine vision, industrial inspection, surveillance, aerospace, and more.
The C5440, C4440, and C6440 cameras feature 17 MP, 20 MP, and 31 MP Sony Pregius CMOS
sensors respectively, provide support for active Canon EOS lens with iris and focus controls.
Camera Model
SFP-C5440
SFP-C4440
SFP-C6440
October 8, 2020
Resolution
Resolution
(MP)
(H x V)
17
5472 x 3084
20
4416 x 4436
31
6464 x 4860
Page
10 of 170
Frame
Type
Optical
Rate
(Color/
format
(Max)
Mono)
56.5
C, M
4/3"
39.6
C, M
4/3"
35.4
C, M
APS-C
Pixel Size
Sony Sensor
(microns)
Model
3.45
IMX387
3.45
IMX367
3.45
IMX342
Rev 1.0