INSTALLATION
MOUNTING - DIN RAIL
BMS MS1 is suitable for internal installations only. The MagIQtouch BMS Controller is
fitted with a DIN rail retainer on the rear of the enclosure. Locate the top catches onto
the rail first, pivot down then secure the bottom catches onto the rail where the DIN rail
retainer will click into place.
MOUNTING - WALL MOUNT
BMS MS1 is suitable for internal installations only. Within the MagIQtouch BMS
Industrial Controller kit are 2 x wall brackets, push fit them into the each side of the
enclosure base. Mark and drill suitable holes in wall and insert wall plugs provided. Align
and screw the MagIQtouch BMS Industrial Controller on to the wall.
B M S
B M S
IN D U
IN D U
ST R IA
S TR IA
L CO N
L C O N
TR O LL
TR O LL
ER M
E R M
S1
1
P W R
/
E R R O
R C O D
E
MAGIQTOUCH BMS INDUSTRIAL CONTROLLER - MANUAL |
ILL2103-A
ILL2104-A
7