Table of Contents
Advertisement
INSTALLATION PREPARATION
WARNING! THIS INSTALLATION SHOULD ONLY BE PERFORMED BY SUITABLY
TRAINED AND QUALIFIED PERSONNEL, IN ACCORDANCE WITH LOCAL AND
NATIONAL WIRING RULES.
Before commencing work on the cooler, ensure it is disconnected from the power
source, when installing the MagIQtouch BMS Industrial Controller select and prepare an
appropriate mounting site with the following features:
• Space for mounting on either DIN rail or directly to the wall.
• Clearance for inserting digital & analogue inputs & outputs.
• Within 100m of cooler.
• Dedicated 12Vdc power input for "Actual" fan speed and logic Error Status signal.
Note! Do not use power boards and double adaptors!
|
4
™
Advertisement
Table of Contents
