Solid-State Drive Specifications - HP Elite Folio Maintenance And Service Manual

Table 10-2 Display specifications (continued)
Resolution
Surface treatment
Brightness
Viewing angle
Backlight

Solid-state drive specifications

This section provides specifications for your solid-state drives.
Table 10-3 Solid-state drive specifications
Dimensions
Height
Length
Width
Weight
Interface type
Ready time, maximum (to not busy)
Access times, logical
Transfer rate
Sequential read
Random read
Sequential write
Random write
Total logical sectors
Operating temperature
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications can
differ slightly.
NOTE: Certain restrictions and exclusions apply. Contact support for details.
Metric
1920 × 1280 (WUXGA+)
BrightView
400 nits (BrightView panels)
1000 nits (Antiglare panels)
UWVA
WLED
128 GB* 256 GB*
1.0 mm 1.0 mm
50.8 mm 50.8 mm
28.9 mm 28.9 mm
< 10 g < 10 g
PCIe PCIe
1.0 ms 1.0 ms
1.0 ms 0.1 ms
up to 2150 MB/s up to 2150 MB/s
Up to 300,000 IOPs Up to 300,000 IOPs
up to 1550 MB/s up to 1550 MB/s
Up to 100,000 IOPs Up to 100,000 IOPs
234,441,648 468,883,296
0°C to 70°C (32°F to 158°F)
U.S.
512 GB*
1.0 mm
50.8 mm
28.9 mm
< 10 g
PCIe
< 1.0 ms
0.1 ms
up to 2150 MB/s
Up to 300,000 IOPs
up to 1550 MB/s
Up to 100,000 IOPs
1,000,215,216
Solid-state drive specifications 57