6. Starting Web Management
The following shows how to start up the Web Management of the Managed Switch.
Note the Managed Switch is configured through an Ethernet connection. Please make
sure the manager PC must be set on the same IP subnet
For example, the default IP address of the Managed Switch
then the manager PC should be set at 192.168.0.x (where x
between 1 and 254, except 100), and the default subnet mask is
Managed Switch
IP Address:
192.168.0.100
Logging in the Managed Switch
1. Use Internet Explorer 8.0 or above Web browser and enter IP address
http://192.168.0.100 (the factory default IP address or the one that you have
just changed in console) to access the Web interface.
RJ45/UTP Cable
Figure 6-1: IP Management Diagram
address.
is 192.168.0.100,
is
a
number
255.255.255.0.
PC / Workstation
with Web Browser
192.168.0.x
9