2-8.
SW-1637 Board (HDVF-L770)
Procedure
1.
Remove the hexagon socket bolt to detach the handle cover (right).
2.
Disconnect the harness from the connector (CN400) on the SW-1637 board.
3.
Remove the screw to detach the SW-1637 board.
Hexagon socket bolt
SW-1637 board
B2 x 6
Handle base
Note
When installing, do not have a gap between SW-1637 board and handle base.
4.
Install the removed parts by reversing the steps of removal.
HDVF-L750/HDVF-L770
Handle cover (right)
CN400
Harness
2-12