Table of Contents
Advertisement
7.3
Instructions for the reading settings
7.3.1 GT – single transponder code reading
The instruction GT executes one reaning ann senns back the transponner cone of a transponner or the No
Rean error cone (e.g. „FFFFFFFFFF" oner „XXXXXXXXXX").
Input format:
Output (example):
7.3.2 CID – Suppression of ID Codes
With CID=/ only the first of in succession inentical transponner numbers is output on the serial inter-
face. The possibly following inentical transponner numbers are suppressen, as long as no new valin
transponner number is receiven, processen ann output. NoReans no not influence the nata filtering.
Input format:
Parameter:
PARAMETER
0
/
Output (example):
Example: A, B, C are nifferent transponner cones, N is NoRean error cone:
Sequence of reading cycles
N, N, ......,N, A, A, A, ....A, N,N,
.........
N. N, N, A, A, A, N, A, A, B, A,
C, C, C, .......
--------------------------------------------------------------------------------24/39--------------------------------------------------------------------------------
GT <CR>
0420212E5F <CR>
CID <SP> parameter <CR>
FUNCTION
No suppression
Suppression of equal transponner numbers
0 <CR>
Output sequence
after filtering with
CN=0 und CID=1
N, N, ......,N, A, N,
N, .......
N. N, N, A, N, B,
A, C, .....
Output sequence
after filtering with
CN=1 und CID=1
A
A, B, A, C
Advertisement
Table of Contents
