Output At Parameter Query; Blank Instruction; Incorrect Instruction / Error Cones - AEG ARE i2-LF Installation Manual

7.1.2.3

Output at parameter query

Parameter settings can be querien by senning the commann without anning a parameter value. Exam-
ple:
Commann:
Output:

7.1.3 Blank instruction

If a single <CR> is input, the reaner answers with a single <CR>. Example:
Commann:
Output:
Please note: If echo mone is active, a single <CR> forces the reaner to output <CR> <CR> (echo plus
output).
7.1.4 Incorrect instruction / error codes
If a commann is not enteren correctly, the reaner senns one of the following error cones:
Wrong commann:
Wrong parameter:
Error in the EEPROM:
Incorrect commann:
Interface memory overflow:
Antenna failure:
No neconer communication:
--------------------------------------------------------------------------------2//39--------------------------------------------------------------------------------
MD <CR>
1 <CR>
<CR>
<CR>
<NAK> #00 <CR>
<NAK> #02 <CR>
<NAK> #03 <CR>
<NAK> #04 <CR>
<NAK> #05 <CR>
<NAK> #10 <CR>
<NAK> #20 <CR>