Home Aide Easy Trak II User Manual page 43

Problem
Display remains blank after
the Test strip has been
inserted into the Meter.
The Code Number on the
Meter is different from the
Code number printed on the
Test Strip vial.
Cause
1. Batteries may not be
installed properly.
2. Battery power is too low
for use.
3. Too much time has passed
between inserting the Test
Strip and performing the
test.
4. Test Strip has not been
fully inserted into the
Meter.
Incorrect Code number has
been inputted into the
Meter.
Easy Trak II
Solution
Install the batteries
1.
correctly.
Replace with new batteries.
2.
3. Reinsert the Test Strip into the
Meter.
4. Reinsert the Test Strip into the
Meter.
Recode the Meter to match
the Code number on the
Strip vial label.
Blood Glucose Monitoring System
Test
40