Home Aide Easy Trak II User Manual page 17

The Control Solution is used to check and ensure that the
Test Strip are working together properly and that you are performing the test correctly.
Trak II
For an accurate reading, check the system with the
routine basis.
After coding the
Easy Trak II
button to select control solution test mode "CTL", then you can perform the control solution
test. If you decide not to perform a control solution test, press "S" button before the " " show
up, the "CTL" sign will disappear and meter will go back to blood glucose test mode.
Caution:
Make sure that you have set the
"CTL", so the result will not be stored into the memory and incorporated into the 14-
day or 30-day average.
Easy Trak II
Meter and the display show "mg/dL" or "mmol/L", press "S"
Meter in the Control Solution test mode
Easy Trak II
Meter and
Easy Trak II
Control Solution on a
Easy Trak II
Blood Glucose Monitoring System
Easy
14