Table of Contents
Advertisement
Easy Trak II
Blood Glucose Monitoring System
Obtain a Blood Sample
Sample may be obtained from finger as the following procedure:
1. Remove the endcap of the lancing device by gently turning and pulling straight out.
2. Insert the lancet into the lancet holder.
3. Twist and remove the protective, lancet cover to expose the sterile needle tip.
4. Replace the endcap by back on the body of the lancing device.
5. Pull back on the cocking mechanism until it comes to a stop.
6. Place the lancing device firmly against the sample site and press the release button.
7. After sampling, remove the endcap containing the used lancet.
8. Remove the lancet from the lancing device. Discard the used lancet properly in
accordance with local, state, and federal law.
For further instructions please see insert provided with lancing device
22
Advertisement
Table of Contents
