Step 3 - Attach The Motor Hoist To The Motor Mounting Plate - Bestop HOSS HARDTOP HOIST Assembly Instructions, Use & Care Manual And Warranty

3
Attach the motor hoist to the motor mounting plate
□ Install the motor over the top of the 4 fixed, threaded bolts on the motor mounting plate (A) and tighten nuts. (It is easier if you install
the nuts loosely on the treads and slide motor on top.)
□ Once the motor hoist is properly positioned on the motor mounting plate, tighten the nut with the ratchet or the adjustable wrench until
the motor hoist is securely attached to the motor mounting plate.
WARNING: Slide the motor hoist until the tabs are firmly
against the threaded bolts. Do not leave any space between
the bolts and the enclosed end of the mounting tabs.
P9 – 4282001 Rev. A 0720
Installation
HOSS HARDTOP HOIST
Installation instructions – HOSS HARDTOP HOIST
Vehicule application:
ALL JEEP® WRANGLER
AND GLADIATOR HARDTOP
Part Number 42820-01
©BESTOP 2020, inc.