2
Install the motor mounting plate to the ceiling
□ Using a power drill with a
□ Using the ratchet and
3
fastened.
WARNING: Motor mounting plate must
be fastened to wooden joists in the building
framing. Do not fasten to drywall, particle board,
plaster or other such materials. Failure to do
this may result in injury or death.
P8 – 4282001 Rev. A 0720
Installation
HOSS HARDTOP HOIST
/
in. drill bit attached, drill six pilot holes into the center of the joists.
1
8
in. socket (T) fasten 6 of the 4 in. lag bolts (K) into the joists until the motor mounting plate is securely
⁄
8
Installation instructions – HOSS HARDTOP HOIST
Vehicule application:
ALL JEEP® WRANGLER
AND GLADIATOR HARDTOP
Part Number 42820-01
x 6
x 1
©BESTOP 2020, inc.