Step 9 - Position Jeepnunder The Hoist; Step 10 - Adjust Hooks And Attach Straps - Bestop HOSS HARDTOP HOIST Assembly Instructions, Use & Care Manual And Warranty

9
Position Jeep under the hoist
□ If you are removing the roof, center the Jeep under the
hoist and lower the hooks.
□ Remove all fasteners and connections according to the
manufacturer's instructions.
□ If your roof is removed, position your roof under the hooks.
10
Ajust hooks and attach straps
□ Make sure your hooks are perpendicular to your Jeep with the opening of the hook facing the driver side. Attach the shortest loop from
the cleat of your passenger strap to the hook first followed by the driver side. Repeat for rear strap.
Use
ratchet
to rotate
hook
Short end
loop cleat
P15 – 4282001 Rev. A 0720
Installation
HOSS HARDTOP HOIST
driver
side
Long end
loop
Installation instructions – HOSS HARDTOP HOIST
cleat
Vehicule application:
ALL JEEP® WRANGLER
AND GLADIATOR HARDTOP
Part Number 42820-01
©BESTOP 2020, inc.