Step 7 - Level; Step 8 - Test The Unit - Bestop HOSS HARDTOP HOIST Assembly Instructions, Use & Care Manual And Warranty

7
Level
□ The height adjustment bracket (E) is adjustable to make your hooks perfectly level. Lower your straps to eye level and adjust the pin
in the height adjustment bracket (E) to the desired hole to make your straps level.
NOT LEVEL
□ If you are using a lower hole on your adjustment bracket, use the guide pin to keep the hook straight.
8
Test the unit
□ Press and hold the rocker switch on the hand control to raise and lower the hook bar. When the hook bar reaches the uppermost travel
point, the stopper plate above the cable hook will trigger the limit switch ceasing upward movement.
P14 – 4282001 Rev. A 0720
Installation
HOSS HARDTOP HOIST
Installation instructions – HOSS HARDTOP HOIST
Vehicule application:
ALL JEEP® WRANGLER
AND GLADIATOR HARDTOP
Part Number 42820-01
©BESTOP 2020, inc.